Giải pháp
Horse Construction cung cấp đầy đủ các loại vật liệu gia cố kết cấu với hỗ trợ kỹ thuật, hỗ trợ tài liệu, hỗ trợ sản phẩm, hỗ trợ phần mềm, hỗ trợ dự án.
The Effect of Local Reinforcement Of Prestressed Carbon Fiber Strip on Bridge As a Whole

The Effect of Local Reinforcement Of Prestressed Carbon Fiber Strip on Bridge As a Whole
(1) Prestressed carbon fiber strip can reinforce bridge structures that have certain damages and diseases, which can significantly reduce the tensile stress at the bottom of the reinforced beam, and the reinforcement effect is obvious. In addition, the lateral connection of the entire bridge can increase the bearing capacity of the unreinforced part of the beam to a certain extent, and produce a good overall effect.
(2) Prestressed carbon fiber strip strengthens the concrete bridge, and there are different degrees of tensile stress along the longitudinal, horizontal and vertical directions of the contact part of the carbon fiber strip and the concrete member. There is a tendency for the carbon fiber strip to peel off from the surface of the concrete. Improper handling will cause secondary damage to the structure, so measures should be taken to prevent it.
(3) The measured value of the reinforced bridge is basically the same as the stress change of the finite element simulation value, which shows that the established ANSYS model has a certain practicability. The finite element model can be used for simulation in actual engineering to predict the reinforcement effect of prestressed carbon fiber strip to strengthen the bridge
Bạn có thể tìm thấy mọi thứ bạn cần ở đây. Hãy tin tưởng và thử nghiệm các sản phẩm này, bạn sẽ thấy sự khác biệt lớn sau đó.
Lớp bọc sợi carbon đơn hướng, cường độ cao được bão hòa trước để tạo thành lớp bọc polyme gia cường sợi carbon (CFRP) dùng để gia cố các cấu kiện bê tông kết cấu.
Dải / tấm polyme gia cường sợi carbon (CFRP) cường độ cao để gia cố kết cấu và sửa chữa bê tông
Tấm polyme gia cường sợi carbon (CFRP) ứng suất trước dùng để gia cố sàn, dầm nhằm tăng độ cứng, giảm biến dạng và độ võng của các cấu kiện, giảm vết nứt, tránh và ngăn ngừa nứt.