In the carbon fiber reinforcement process, one of the important processes is to stick the carbon fiber cloth to the component with carbon fiber glue.

Apply the carbon fiber impregnating glue evenly to the sticking area, and apply the corners more appropriately. After dragging the unidirectional carbon fiber, wind and align it, and then use a plastic scraper or roller (paint roller that removes the fluff from the outside) to roll it repeatedly in the same direction until the adhesive seeps out. Then the impregnated adhesive is evenly coated on the outer surface of the carbon fiber wrapper and rolled repeatedly, so that the impregnated adhesive can immerse the carbon fiber wrapper in two ways. If it is pasted multiple times, until the fingers touch the dry, the next layer of pasting can be a beginner.

How to distribute and use the glue for carbon fiber cloth impregnating glue?

Assuming that the amount of glue used per square meter of carbon cloth surface is G, it is advisable to brush about 70% of the glue on the bonding surface of concrete and carbon fiber cloth, and achieve basic infiltration by roller, scraping and dead weight. The remaining 30% of the glue is applied to the outer surface of the carbon cloth, and the two-way impregnation is achieved by rolling and scraping.