In the construction process, it is stipulated that the reinforcement should be inserted in a single direction while turning and inserting until it reaches the specified depth. Why should it be so stipulated? What are the benefits of this? Today, Horse will analyze and analyze for everyone.

Stir the glue more evenly

The anchoring epoxy glue is automatically mixed by a static mixer and then injected into the hole, which may cause uneven mixing. Screw in the steel bars in the same direction, just like manual mixing, which increases the mixing time invisibly, which can make the glue mixing more uniform and give full play to its performance.

Avoid bubbles
Screw in the steel bars in the same direction to prevent the glue from mixing with air to form bubbles, thereby improving the bonding strength.

Increase bonding area
Rebar is generally used for reinforcement in reinforcement projects, because its surface is ribbed, if it is inserted directly, the glue cannot be guaranteed to be uniform. If the steel bar is screwed into the hole, it can ensure that the small surfaces of the steel bar are covered with glue and the glue is uniform.

Avoid glue overflow
If the steel bar is inserted directly, the glue will easily overflow the hole under pressure, which will not only cause waste, but the planting of steel bars will also cause hidden dangers due to insufficient glue. Therefore, the reinforcement of the planting bar requires screwing in the steel bar, which can prevent the glue from being taken out of the hole and ensure the safety of the planting bar project.

Ensure uniform gap
Screwing in the steel bar is beneficial to make the gap between the implanted steel bar and the hole wall uniform.