Anchoring adhesives are widely used in concrete, rock and other substrates in reinforced, screw implantation; reconstruction of building structure reinforcement , curtain wall construction, equipment installation, fixed housing decoration engineering.

Planting steel bar to achieve better results must follow these:

1. Drilling according to the requirements and to ensure the size of the hole and the depth of drilling;

2. Hole dust must be cleaned with special air cylinder and brush, repeated less than 3 times;

3. Reinforced steel bar's surface rust treatment, and acetone or alcohol wipe clean;

4. If the use of bottled anchoring adhesive, adhesive and curing agent according to the proportion of mixing; if the use of injectable adhesives, in construction must be squeezed out front mixed glue glue gun is not uniform.

5. Glue must be slowly injected into the hole, to ensure that no bubbles or voids in the hole, the amount of glue injection shall not be less than 2/3 of the hole depth;

6. Can not shake steel bar or welding work in the curing early time.